AAP Elite S series Especificações descarregar pdf (Página 12)

Page 12

LCD KEYPAD ADJUSTMENTS

LCD KEYPAD ADJUSTMENTSLCD KEYPAD ADJUSTMENTS

LCD KEYPAD ADJUSTMENTS

ADJUSTING THE LCD KEYPAD BACKLIGHTING

The user can independently adjust the backlight level of the LCD display and the Keypad Buttons from off to on with

16 steps in between. The Buttons used for these special functions vary depending on the LCD keypad. There are two

types of LCD keypad that can be used, the “AAP” keypad and the “Crow” keypad. The Crow keypad can be identified

by the extra buttons “A”, “B” & “CHIME”.

To increase the AAP LCD backlight level Press “CONTROL” followed within 2 seconds by “ARM”. By holding down

the “Control” button and repeatedly pressing the “ARM (Left Arrow)” button you can increase the LCD backlight level

to the maximum.

To reduce the AAP LCD backlight level Press “CONTROL” followed within 2 seconds by “PANIC”. By holding down

the “Control” button and repeatedly pressing the “PANIC (Right Arrow)” button you can decrease the LCD backlight

level until it is off.

To increase the AAP Keypad Button backlight level Press “CONTROL” followed within 2 seconds by MEMORY”.

By holding down the “CONTROL” button and repeatedly pressing the “MEMORY (Up Arrow)” button you can in-

crease the Keypad LED backlight level to the maximum.

To reduce the AAP Keypad Button backlight level Press “CONTROL” followed within 2 seconds by “STAY”. By

holding down the “CONTROL” button and repeatedly pressing the “STAY (Down Arrow)” button you can decrease

the Keypad LED backlight level until it is off.

To increase the Crow LCD backlight level Press “CONTROL” followed within 2 seconds by “STAY”. By holding

down the “Control” button and repeatedly pressing the “STAY (Left Arrow)” button you can increase the LCD back-

light level to the maximum.

To reduce the Crow LCD backlight level Press “CONTROL” followed within 2 seconds by “BYPASS”. By holding

down the “Control” button and repeatedly pressing the “BYPASS (Right Arrow)” button you can decrease the LCD

backlight level until it is off.

To increase the Crow Keypad Button backlight level Press “CONTROL” followed within 2 seconds by “MEM!”.

By holding down the “CONTROL” button and repeatedly pressing the “MEM! (Up Arrow)” button you can increase

the Keypad LED backlight level to the maximum.

To reduce the Crow Keypad Button backlight level Press “CONTROL” followed within 2 seconds by “"”. By hold-

ing down the “CONTROL” button and repeatedly pressing the “" (Down Arrow)” button you can decrease the Key-

pad LED backlight level until it is off.

ADJUSTING THE KEYPAD BUZZER TONE

The user can adjust the frequency (tone) of the LCD keypad buzzer within a range of 16 steps. By adjusting the

frequency the volume of the tone produced at the buzzer varies as well.

To increase the frequency of the AAP LCD buzzer Press “CONTROL” followed within 2 seconds by “1”. By hold-

ing down the “CONTROL” button and repeatedly pressing the “1” button you can increase the frequency of the

buzzer tone.

To decrease the frequency of the AAP LCD buzzer Press “CONTROL” followed within 2 seconds by “2”. By hold-

ing down the “CONTROL” button and repeatedly pressing the “2” button you can decrease the frequency of the

buzzer tone.

To increase the frequency of the CROW LCD buzzer Press “CONTROL” followed within 2 seconds by “A”. By

holding down the “CONTROL” button and repeatedly pressing the “A” button you can increase the frequency of the

buzzer tone.

To decrease the frequency of the CROW LCD buzzer Press “CONTROL” followed within 2 seconds by “B”. By

holding down the “CONTROL” button and repeatedly pressing the “B” button you can decrease the frequency of the

buzzer tone.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 102 103

Comentários a estes Manuais

Sem comentários

AAP Elite S series Especificações Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso AAP Elite S series